Help Center

Setting up WiFi network access on a Fanvil IP Phone using Wi-Fi Fanvil Dongle & Fanvil X3SW

  • Updated

 

PLEASE NOTE
This method is for connecting your local Wi-Fi using the USB Wi-Fi Dongle connected to the Fanvil
X5U / X6U / X7U / X210 Models
&
for connecting your local Wi-Fi using the built in Wi-Fi card in the Fanvil X3SW 

 

  • For the X5U / X6U / X7U / X210 ModelsInsert the WiFi Dongle into the USB port on the IP Phone

 

  • On the Main Screen, select Menu

wifi_dongle_1.bmp

 

 

  • Using the arrow and ok buttons, go to Basic Settings and press OK

wifi_dongle_2.bmp

 

  • Select WLAN and press OK

 

mceclip1.png

  • Using the arrow buttons set the WLAN to enabled, once successful it will search the local networks

wifi_dongle_4.bmp

 

wifi_dongle_5.bmp

 

 

  • Using the arrow buttons go to the section marked Available Network and press OK/Enter

wifi_dongle_6.bmp

 

 

  • Using the arrow buttons, select your WiFi then press the button marked Link

wifi_dongle_7.bmp

 

 

  • Using the number buttons, enter the WiFi password for your WiFi (case sensitive)

wifi_dongle_8.bmp

 

Was this article helpful?

Comments

0 comments

Article is closed for comments.