Help Center

Search

Setting up WiFi network access on a Fanvil X3SW or V62W IP Phone / Fanvil Wi-Fi Dongle / Linkvil W611W

  • Updated

 

PLEASE NOTE 
This method is used for connecting your local Wi-Fi using the USB Wi-Fi Dongle connected to the Fanvil 
X5U / X6U / X7U / X210 Models

connecting your local Wi-Fi using the built in Wi-Fi card in the Fanvil X3SW or V62W Deskphones


connecting your local Wi-Fi using the built in Wi-Fi card in the Fanvil/Linkvil W611W 

 

 

mceclip0.png

How to connect to your local WiFi 
using the WiFi Dongle or X3SW or V62W
 

  • For the X5U / X6U / X7U / X210 Models
    First, Insert the WiFi Dongle into the USB port on the IP Phone

 

  • On the Main Screen, select Menu

wifi_dongle_1.bmp

 

 

  • Using the arrow and ok buttons, go to Basic Settings and press OK

wifi_dongle_2.bmp

 

  • Select WLAN or WIFI and press OK

 

mceclip1.png

  • Using the arrow buttons set the WLAN or WIFI to enabled, once successful it will search the local networks

wifi_dongle_4.bmp

 

wifi_dongle_5.bmp

 

 

  • Using the arrow buttons go to the section marked Available Network and press OK/Enter

wifi_dongle_6.bmp

 

 

  • Using the arrow buttons, select your WiFi then press the button marked Link

wifi_dongle_7.bmp

 

 

  • Using the number buttons, enter the WiFi password for your WiFi (case sensitive)

wifi_dongle_8.bmp


(if you require to use a symbol (! @ " etc) please press the number/123 option until it shows 2ab, 
then press the * to go through the available symbols)

 

mceclip0.png

 

Linkvil W611W WiFi Phone


linkvil connect 1.bmp

SELECT MENU

 


linkvil connect 2.bmp

SELECT WLAN or WIFI



linkvil connect 3.bmp

WLAN or WIFI SHOULD BE SET TO ENABLED

SCAN FOR AVAILABLE NETWORKS

WHEN THE SCAN IS COMPLETE
PRESS OK/ENTER ON
AVAILABLE NETWORKS

 

 

 

linkvil connect 4.bmp

FIND THE NETWORK/SSID
MATCHING YOUR NETWORK/BROADBAND
SELECT MORE > LINK

 

linkvil connect 5.bmp

 

 

 

 

linkvil connect 6.bmp

ENTER THE PASSWORD FOR YOUR WiFi / WPA2 PASSWORD
(this is case sensitive)


YOU CAN USE THE # KEY TO SWITCH BETWEEN 
THE DIFFERENT ALPHABET/NUMBER OPTIONS


(if you require to use a symbol (! @ " etc) please press the * to go through the available symbols)

 

PRESS OK WHEN COMPLETE

 

 

 

Was this article helpful?

Comments

0 comments

Article is closed for comments.